Chameleon ISO Cab



Perfect for the studio AND your live application. Why compromise? Have both!


There is a shift on large stages happening. Artists are asking for lower and lower stage volume. Having experienced using ISO cabs in the past with much distain, Joe Morgan set out to build the world’s most innovative iso-cab with real world usability. After a year of research the following design criteria was set: It needed to sound good with clean and overdriven tones. Players should be able to easily swap the speakers. It needed to sound like a guitar cab. Mic placement should allow players to easily put the mic where it needs to be. The cab should function as a live cab when not in use as an isolation cab. Morgan’s Chameleon solves all these problems!


The Chameleon is a traditional closed back 1×12 cab which in seconds can transform into an isolation cab. This two in one design gives players the best of both worlds – gig by day and record at night!

Four quick connect latches allow you to attach the isolation chamber to the front of the 1×12 cab. What makes this isolation cabinet different from most is that Joe designed an acoustic trap that allows air to enter and exit the isolation portion while trapping the acoustic portion of the sound waves. This allows the speaker to behave like it would normally, as opposed to the increased dampening caused by the sealed design you find on most ISO cabs. What this means to you is that your chimey cleans are still going to be chimey!

In order to address mic placement Morgan partnered up with Triad-Orbits to include 2 x M2-R 180-degree mic swivels in each cab. These amazing devices allow you to truly pinpoint your mic placement. To top it all off the Chameleon features a front panel access door, allowing you to easily get your mic placement just right.  And as with all Morgan cabinets, the Chameleon is built in the USA using Baltic birch  construction and backed by a limited lifetime warranty

Finally, Joe Morgan designed an Isolation cab that works and sounds like a conventional cab!

Additional information

Weight70 lbs
Dimensions24 × 20 × 21 in


  • 1×12″ Extension Cab / Isolation Cab
  • Over 30db of sound dampening
  • Free Flow air port allows correct speaker/mic relationship
  • Dual goosenecks with Triad-Orbits M2-R 180 rotational mic mounts
  • Quick connect ISO portion allows easy disconnection for use as a conventional 1×12 cab
  • Quick  connect front panel access
  • Celestion UK made 16 Ohms G12H75 Creamback Loaded
  • Multi-ply Baltic Birch construction
  • Handcrafted in the USA
  • Limited lifetime warranty
  • Cab Dimensions: 24″W x 10″D x 21″H
  • Isolation Dimensions: 24″W x 20″D x 21″H
  • Cab Weight: 38 lbs.
  • Isolation Weight: 70 lbs


Morgan History

Joe Morgan has been building, modifying and repairing amplifiers since 1996. His designs are seen in stadiums and arenas all over the world. It is hard to turn on a music awards show without seeing his products. Joe designs for the working musician, whether that means a Sunday morning church gig or touring the world with James Taylor.

Joe will be the first to tell you that tube amps are not rocket science (Joe was part of the engineering team that developed the first GPS satellites). Tube amps are only as good as their components and Morgan chooses the best of the best. Engineered with custom designed transformers to provide the best possible sonic signature they also provide Morgan with the confidence to offer a limited lifetime warranty.

Handwired in the USA.

You may also like…